Jump to content

Monero

Sign in to follow this  
  • entries
    186
  • comments
    0
  • views
    12634

Monero GUI 0.17.1.5 'Oxygen Orion' released

Sign in to follow this  
Snider

29 views

oxygen-orion.png

Overview

This is the v0.17.1.5 minor point release of the Monero GUI software. This release improves simple mode reliability.

The latest CLI release notes can be found on the precedent blog post

Some highlights of this minor release are:

  • Simple mode: skip syncing nodes
  • Write QML cache to portable folder
  • Linux: enable high DPI support
  • Minor bug fixes

The complete list of changes is available on GitHub, along with the source code.

Contributors for this Release

This release was the direct result of 4 people who worked, largely unpaid and altruistically, to put out 22 commits containing 228 new lines of code. We'd like to thank them very much for their time and effort. In no particular order they are:

  • luigi1111
  • xiphon
  • Snipa
  • selsta

Download

The new binaries can be downloaded from the Downloads page or from the direct links below.

A complete guide for the GUI wallet is included in the archives, but an online version is available.

Download Hashes

If you would like to verify that you have downloaded the correct file, please use the following SHA256 hashes:

monero-gui-win-x64-v0.17.1.5.zip, a5ed83ffeec340b6695c4dcf0305decd5c419a97572e104c323b956deeac3c3d
monero-gui-install-win-x64-v0.17.1.5.exe, 89e6bad3e8b5b1a57c647f7ddb30ebe4476c74db5730738c0cb7115fb8e44b65
monero-gui-mac-x64-v0.17.1.5.dmg, 7c7812263ab242f954534d062984e63cbe34211d8a6fd7f08e4bacfeb52ad1ec
monero-gui-linux-x64-v0.17.1.5.tar.bz2, 577c5b2bcef436cffb57e4addf3ae9b669733f9aae83dc74f5025c76671667ed

A GPG-signed list of the hashes is at https://getmonero.org/downloads/hashes.txt and should be treated as canonical, with the signature checked against the appropriate GPG key in the source code (in /utils/gpg_keys). To ensure that the files you download are those originally posted by the maintainers, you should both check that the hashes of your files match those on the signed list, and that the signature on the list is valid.

Two guides are available to guide you through the verification process: Verify binaries on Windows (beginner) and Verify binaries on Linux, Mac, or Windows command line (advanced).


View the full article

Sign in to follow this  


0 Comments


Recommended Comments

There are no comments to display.

Guest
Add a comment...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • HashVault Latest Blocks

  • HashVault Stats

    • Global Hashrate
      320.11 GH
    • Avg Hashrate
      173.03 MH
    • Total Miners
      1850
    • Miners Paid
      42706
    • Total Payments
      1531095
    • Total Hashes
      9.23 EX
    • Blocks Found
      1729224
  • Posts

    • А куда пул вообще пропал? Нужно было посмотреть txid своих старых выплат, а страница тупо пропала.
    • The new beta version is ready. You can download PhoenixMiner 5.5b from here: https://mega.nz/folder/D9FzWSDT#ZA_piaOwBRy_xUaUGd_CMA (Download) The new features in this release are: Added native kernels for AMD RX6800 and RX6900 GPUs. These are faster than the generic kernels and produce a lot less stale shares Updated kernels for AMD Polaris, Vega and Navi GPUs that are slightly faster and use less power than before when mining ETH. To use these updated kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux The Nvidia mining cards (P106, P104, etc.) can now use straps and hardware control options (power limit, memory overclock, max temperature, etc.) under Windows Added support for AMD Linux drivers 20.45-1164792 and 20.45-1188099. Use this drivers only if you have RX6800 or RX6900 GPU. WARNING: Vega and Navi GPUs wont' work with these drivers! Automatically set -ttli instead of -tmax when the later is not supported by the driver. This will throttle down the GPUs when they reach the specified temperature to avoid overheating Notes -Fixed global problems for video cards from Nvidia/AMD -Fixed errors and crashes when the miner was running -Increased hashrate on video cards series 30xx -Increased hashrate on Ethash by an average of 15% -Increased hashrate on ETCHash by an average of 10% -Improved the work of the miner in general If you have RX6800 or RX6900 card, do not use the PhoenixMiner hardware control options (-cclock, -mclock, etc.) because there is yet another undocumented change in OverDrive and some of them will work, but some won't with weird results - we will implement them properly in the next version. Instead use the AMD control panel to set the card parameters. Good starting point are the following options: core clock 1500 MHz, mem clock 2050 MHz, core voltage 800 mV, set faster memory timings, and a custom fan curve to keep the temperature below 65-66 C. Please let us know if you have any problems or questions related to PhoenixMiner 5.5b.
    • Dear Community,   Reading the "Getting Started" section in the Pool area and some threads on the Forum, I still have a little question.  Whom do you recommend mining solo?  The hash rate seems to be the same whether I do SOLO mining or not.  Thanks! Bee *** My machine is a simple workstation with a slim linux running: * ABOUT XMRig/6.7.0 gcc/9.3.0 * LIBS libuv/1.38.1 OpenSSL/1.1.1i hwloc/2.2.0 * HUGE PAGES supported * 1GB PAGES unavailable * CPU Intel(R) Xeon(R) CPU E3-1280 V2 @ 3.60GHz (1) 64-bit AES L2:1.0 MB L3:8.0 MB 4C/8T NUMA:1 * MEMORY 1.1/15.6 GB (7%) * DONATE 1% * ASSEMBLY auto:intel * POOL #1 pool.hashvault.pro:3333 algo auto * COMMANDS hashrate, pause, resume, results, connection * OPENCL disabled * CUDA disabled  
    • Update: Having applied the Script from the thread linked to above, I get another outcome. Is that as it is supposed to be?? Thanks again Bee alpinehost:/home/alp# chown root /usr/share/hugepages.sh alpinehost:/home/alp# /usr/share/./hugepages.sh enable Huge pages enabled alpinehost:/home/alp# sysctl -a | grep hugep sysctl: error reading key 'net.ipv6.conf.all.stable_secret': I/O error sysctl: error reading key 'net.ipv6.conf.default.stable_secret': I/O error sysctl: error reading key 'net.ipv6.conf.eth0.stable_secret': I/O error sysctl: error reading key 'net.ipv6.conf.lo.stable_secret': I/O error vm.nr_hugepages = 9 vm.nr_hugepages_mempolicy = 9 vm.nr_overcommit_hugepages = 0 alpinehost:/home/alp# The vm.nr_hugepages changed dramatically. What does it mean anyways?
    • Dear Community,    I would like to have these Hugepages supported now :-) I am thus referring to this thread here, which seems to be closed. I have tried the following to enable hugepages AND get them working until 1 GB.  See me output: Thanks so far! Bee *** Question: Why is HUGEpages 1 GIg not available?  How do I set the value correct? My output: sysctl -a | grep hugep sysctl: error reading key 'net.ipv6.conf.all.stable_secret': I/O error sysctl: error reading key 'net.ipv6.conf.default.stable_secret': I/O error sysctl: error reading key 'net.ipv6.conf.eth0.stable_secret': I/O error sysctl: error reading key 'net.ipv6.conf.lo.stable_secret': I/O error vm.nr_hugepages = 2349 vm.nr_hugepages_mempolicy = 2349 vm.nr_overcommit_hugepages = 0 *** and in xmrig *** ABOUT XMRig/6.7.0 gcc/9.3.0 * LIBS libuv/1.38.1 OpenSSL/1.1.1i hwloc/2.2.0 * HUGE PAGES supported * 1GB PAGES unavailable * CPU Intel(R) Xeon(R) CPU E3-1280 V2 @ 3.60GHz (1) 64-bit AES L2:1.0 MB L3:8.0 MB 4C/8T NUMA:1 * MEMORY 3.2/15.6 GB (21%) * DONATE 1% * ASSEMBLY auto:intel * POOL #1 pool.hashvault.pro:3333 algo auto * COMMANDS hashrate, pause, resume, results, connection * OPENCL disabled * CUDA disabled  
×
×
  • Create New...